• #470A Acrylic Masonry Block Filler is a premium grade, unique high solids latex coating designed to fill voids, honeycombs and reducing pinholes in interior or exterior porous masonry surfaces. This product uses a 100% Acrylic resin system that is superior to conventional vinyl acrylic resin block fillers. The use of this resin system gives #470A excellent alkali resistance up to a pH of 13. #470A is designed to fill the porous surface of concrete blocks and maximize the spreading rate of the finish coating, giving faster production rates. This heavy duty block filler may be topcoated with latex or alkyd coatings.
• Dry time: 30 Minutes To Touch, 2 Hours To Handle And 4 Hours To Recoat
• 5 gallon bucket
• UPC: 3581904715

• #479 Easy Prime is a professional grade, high build vinyl acrylic latex coating that is designed for use as a primer/sealer on wallboard surfaces. Unlike most primers, #479 goes on in a heavy bodied film which makes it sand exceptionally well, as well as allows it to minimize surface imperfections and irregularities. #479 has good sealing properties and enamel hold out. #479 is high hiding, fast drying, low odor, low VOC*, and will provide an excellent surface for topcoats to adhere to. This product can be topcoated with either latex or oil-based products.
• 5 gallon bucket
• 30 Minutes To Touch, 2 Hours To Handle And 4 Hours To Recoat
• UPC: 3581904795

• Farrell-Calhoun’s 480 Line is a contractor grade interior matte latex wall paint formulated for excellent hiding and ease of application. This product will normally cover most surfaces with one coat unless there is a drastic color change. 480 Line dries to a matte finish which gives the product good touch-up and helps to obscure tape joints and surface imperfections. Good flow and leveling, low odor and low VOC* and non-splattering application are other desirable characteristic properties of this paint
• 5 Gallon bucket
• Dry time: 30 Minutes To Touch, 2 Hours To Handle And 4 Hours To Recoat
• UPC: 3581904805

• 499 waterborne, Mill Prime is a professional grade, interior primer that is formulated to have good hiding and filling properties, outstanding enamel hold out and is a great alternative to solvent borne white lacquer undercoaters. This high solids primer is easy to apply, sands easily,dries to a smooth finish and provides an excellent foundation for enamels on new interior wood, and as a primer for properly prepared interior wallboard, acoustical tile, cured plaster, brick and other masonry surfaces. This product has very low odor, dries quickly.
• 5 gallon bucket
• 30 Minutes To Touch, 1 Hour To Handle And 4 Hours To Recoat With Latex; 8 Hours To Recoat With Alkyd
• Available In White And Can Be Tinted To Pastel Colors Using Universal Colorants. (2 Ounces Per Gallon Max)
• UPC: 3581904995

• The 500 line is a premium semi-gloss alkyd enamel coating that is formulated for high traffic, hard service areas where excellent washability and durability are demanded. This tough, durable product is easy to apply, has outstanding flow and leveling properties, and excellent sheen uniformity. Dirt, stubborn ink spots, pencil, crayon, or finger smears all wash off easily without marring the finish of this high hiding coating. While all interior alkyd-based products may yellow in white and pastel colors that do not receive ultraviolet light, this product contains a unique resin that is superior to most traditional alkyd resins. This product is also sold with a non-yellowing additive to further improve the non-yellowing performance. Yellowing is an inherent characteristic of all alkyd resins. To avoid yellowing from occurring entirely, a water-based product is recommended
• Gallon can
• Dry time: 6 - 8 Hours To Touch, 12 Hours To Handle And 24 Hours To Recoat
• UPC: 3581905001

• The 500 line is a premium semi-gloss alkyd enamel coating that is formulated for high traffic, hard service areas where excellent washability and durability are demanded. This tough, durable product is easy to apply, has outstanding flow and leveling properties, and excellent sheen uniformity. Dirt, stubborn ink spots, pencil, crayon, or finger smears all wash off easily without marring the finish of this high hiding coating. While all interior alkyd-based products may yellow in white and pastel colors that do not receive ultraviolet light, this product contains a unique resin that is superior to most traditional alkyd resins. This product is also sold with a non-yellowing additive to further improve the non-yellowing performance. Yellowing is an inherent characteristic of all alkyd resins. To avoid yellowing from occurring entirely, a water-based product is recommended
• Quart can
• Dry time: 6 - 8 Hours To Touch, 12 Hours To Handle And 24 Hours To Recoat
• UPC: 3581905004

• The 500 line is a premium semi-gloss alkyd enamel coating that is formulated for high traffic, hard service areas where excellent washability and durability are demanded. This tough, durable product is easy to apply, has outstanding flow and leveling properties, and excellent sheen uniformity. Dirt, stubborn ink spots, pencil, crayon, or finger smears all wash off easily without marring the finish of this high hiding coating. While all interior alkyd-based products may yellow in white and pastel colors that do not receive ultraviolet light, this product contains a unique resin that is superior to most traditional alkyd resins. This product is also sold with a non-yellowing additive to further improve the non-yellowing performance. Yellowing is an inherent characteristic of all alkyd resins. To avoid yellowing from occurring entirely, a water-based product is recommended
• 5 gallon bucket
• Dry time: 6 - 8 Hours To Touch, 12 Hours To Handle And 24 Hours To Recoat
• UPC:3581905005

 The 5200 line is a premium satin alkyd enamel coating that is formulated for high traffic, hard service areas such as properly primed interior surfaces of wood, metal, plaster, wallboard, brick, cement, or other masonry surfaces where excellent washability and durability are demanded. This tough, durable product is easy to apply, has outstanding flow and leveling properties, and excellent sheen uniformity which makes the product an excellent choice for cabinets, bookcases, and kitchen and bathroom walls in hospitals, children’s rooms, schools, and bathrooms. Dirt, stubborn ink spots, pencil, crayon, or finger smears all wash off easily without marring the finish of this high hiding coating.

1 Gallon Can

 The 5200 line is a premium satin alkyd enamel coating that is formulated for high traffic, hard service areas such as properly primed interior surfaces of wood, metal, plaster, wallboard, brick, cement, or other masonry surfaces where excellent washability and durability are demanded. This tough, durable product is easy to apply, has outstanding flow and leveling properties, and excellent sheen uniformity which makes the product an excellent choice for cabinets, bookcases, and kitchen and bathroom walls in hospitals, children’s rooms, schools, and bathrooms. Dirt, stubborn ink spots, pencil, crayon, or finger smears all wash off easily without marring the finish of this high hiding coating.

1 Gallon Can

• The 500 line is a premium semi-gloss alkyd enamel coating that is formulated for high traffic, hard service areas where excellent washability and durability are demanded. This tough, durable product is easy to apply, has outstanding flow and leveling properties, and excellent sheen uniformity. Dirt, stubborn ink spots, pencil, crayon, or finger smears all wash off easily without marring the finish of this high hiding coating. While all interior alkyd-based products may yellow in white and pastel colors that do not receive ultraviolet light, this product contains a unique resin that is superior to most traditional alkyd resins. This product is also sold with a non-yellowing additive to further improve the non-yellowing performance. Yellowing is an inherent characteristic of all alkyd resins. To avoid yellowing from occurring entirely, a water-based product is recommended
• Gallon can
• 6 - 8 Hours To Touch, 12 Hours To Handle And 24 Hours To Recoat
• UPC:3581905501

• The 500 line is a premium semi-gloss alkyd enamel coating that is formulated for high traffic, hard service areas where excellent washability and durability are demanded. This tough, durable product is easy to apply, has outstanding flow and leveling properties, and excellent sheen uniformity. Dirt, stubborn ink spots, pencil, crayon, or finger smears all wash off easily without marring the finish of this high hiding coating. While all interior alkyd-based products may yellow in white and pastel colors that do not receive ultraviolet light, this product contains a unique resin that is superior to most traditional alkyd resins. This product is also sold with a non-yellowing additive to further improve the non-yellowing performance. Yellowing is an inherent characteristic of all alkyd resins. To avoid yellowing from occurring entirely, a water-based product is recommended
• Quart can
• 6 - 8 Hours To Touch, 12 Hours To Handle And 24 Hours To Recoat
• UPC: 3581905504